Have you noticed your computer runs more slowly than before? This might be a sign it’s overheating for sure. It’s a known problem that will slow you down as you look for the solution.
If you do not correct the heat problem, your computer will shut down automatically, and some parts may get burnt beyond repair. Also, your fan may start making noises, affecting your Windows user experience. However, if you know how to control the speed of your fan correctly, then you are sure to elude these issues.
In this article, you will learn how to regulate the fan speed on a Windows 10 or Windows 11 PC so you can keep your computer running.
Is It Possible to Control the Fan Speed on a Windows 10 Computer Gathering?
Here are various possible ways by which you can manage the speed of the fan on your Windows 10-based PC. However, it is also important to learn more about the fan.
How to Identify the Fan Type
Two different fans are used in PCs: low- and high-voltage fans; before changing the fans’ controls, you must determine which type of fan is in your PC. Here’s how to do it:
- Disconnect the power chord, and turn off the computer.
- Remove the left-side panel.
- Locate the CPU cooler. Usually, it is at the top end of the motherboard.
- Check the cooler’s fan and then look for the attached cable.
- Ensure the cable operates through a 3-pin DC connection or a 4-pin PMW.
Even if you don’t know much about computer wiring, you can still figure out whether you need a DC or a PMW connector. If a connecter is a DC connecter, it will have three prongs that fit into the hardware, and on the other hand, the PMW connecter will have an extra wire that sends a signal to the PC.
These two connectors can only be controlled through the motherboard, software, or hardware. If you find any of the two connect to your fan, you can be in a position to vary your fan speed.
BIOS programming: How to regulate the speed of a fan
The simplest method of regulating your fan’s speed is by the Basic Input/Output System (BIOS). Because it is incorporated into the motherboard, you cannot recover it via the Windows operating system.
To enter the BIOS, follow these steps:
- When you have a Windows PC, right-click the Start menu and choose Settings.
- Tap Update & Security.
- On the menu on the left-hand side, select recovery.
- Navigate to the Advanced Startup options from the How to Group and get to Restart Now. Your PC will reboot; you can see a new menu at the bottom.
- You will see Troubleshoot in the drop-down list. Move the cursor to the right of it and then click on the word Advanced options.
- Select the UEFI Firmware Settings option to fix a severe Windows error. If you don’t see this option, choose Startup Settings instead.
- While your PC is restarting, press F1 or F2 to go to the BIOS.
- Press Restart.
Once again, your computer will restart, and you will be in the BIOS part.
Every BIOS can be different, but to control the fan, you need to stick with the general steps you have.
Here are the instructions:
- It would be best if you looked for the Hardware Monitoring section. However, it may be found in the PC Health Status.
- Enter the CPU Fan tab.
The following components can be changed once you’re in the fan settings:
- Choosing between DC of PMW fan types
- Choosing the fan mode. The three most frequently used qualities include Full speed, Performance, and silence.
Deciding on the optimum level for the so-called temperature threshold point
Boy, not really!, It is recommended that the performance of a PC is best when the CPU temperature does not go over 70 degrees.
How to Control Fan Speed With Speedfan
Another helpful way to change a fan’s speed is with the help of the Speedfan tool. For CPU settings in detail, the app empowers users providing much more control over their utilization. To use the tool:
- Go to the manufacturer’s website and download and install Speedfan.
- You’ll have two options:
If you wish to allow the Speedfan to have its way with your settings, select the “Automatic fan speed.” - If changes must be made separately, then Configure is the best choice for users. Then, tap Advanced.
- Scroll down the drop-down menu until you come across the CPU type.
- The connector type determines your fan type: you can have a DC or a PMW.
- Select Manual.
- Hit OK and go back to Speedfan’s homepage.
By now, you should be able to adjust the fan’s speed by pressing the arrow icons on the application’s homepage. To adjust the speed, you’ll also find an RPM gauge showing that the fans either work slower or faster. If it is quiet and running efficiently, you have the right speed for the fan.
How to adjust the speed of a fan on a Windows 11 computer
Running into a new means of operation can be a steep learning curve. However, it doesn’t always have to be an advanced approach. First, let me inform you that if you are a Windows 11 user, you can manage your fan in three different ways. Any apps like PC manufacturer software, BIOS, and third-party apps are also suitable for the best Wi-Fi names.
Tips On How To Control Fan Speed On Your PC Using PC Manufacturer Software
Software developed by your computed maker is compatible with your computer. Easy to use and fast. Get the greatest software for your computer by doing the following:
State the type of computer model you are using and the manufacturing company’s name. If you have a custom-built PC, try to search for the model and the provider of your motherboard. This information is ordinarily etiquite in a label, usually on the PC’s rear part.
- Point your browser to the manufacturer’s customer support home page, then choose your model.
- Access the Downloads tab and the System Utility tab.
- Download the utility pack.
- Install and launch the pack.
- Choose the fan speed settings.
Fan settings can be in the form of a percentage scale that can go up to 100% and down to 0%. The greater the setpoint, the lower your PC’s temperature will be. These lower setpoints cause the fan to switch off the cooling process and reduce noise production.
How to Control Fan Speed In Computer and Laptop From BIOS
Happily, it is fairly simple to access the BIOS of a Windows 11 computer and manage fans from there.
- Power down the PC.
- Power on the PC again, and press the BIOS shortcut key. This is the F1, F12, or the “Delete” key, depending on the PC in question and its programs.
- Locate the tab labeled fan settings in the menu. It’s often found under PC Health, Advanced, or in Overclocking.
The percentage is used by BIOS, too, as the fan speed regulation technique. As before, one hundred is the maximum value of the setpoint, whereas zero is its minimum value. After you have made your changes, click on the Save button. Next, hit the Exit key to exit BIOS.
How to Regulate fan speed on pc with third party application
A plethora of third-party apps will assist you with managing your fans. Nowadays, SpeedFan, Argus Monitor, and others are the most famous fans fan-controlling applications. They all work the same way, therefore no matter which one you chose, you will need to do the same as what is described below.
Here’s how to use Argus Monitor:
- In the next steps, I recommend downloading and installing Argus Monitor.
- Launch Argus Monitor.
- Further, select Fan Control in the upper portion of the program.
- In Argus Monitor, the figures denote the fan’s maximum speed as 100 while the minimum as 0. Alter the configurations according to the preference, then write the changes.
Let me also stress that your speed setpoint should never be 0; in most cases, these coolers are not made to stop working. When setting the fans at zero, there is a high probability that they will overheat.
Take Control of Your Fan
It is very important to know how to regulate your fans’ speed. This helps you to determine the most suitable temperature range for your PC and, at the same time, extend its lifespan. Further, it will give you a relatively low-profile environment where you will focus more, thus increasing your efficiency.
Whether you are on Windows 10 or the newer Windows 11, hopefully, this article has demonstrated how to manage your fan preferences properly. What you have to do is just to choose the best speed for you and your PC.
Does your band use a noisy fan that interferes with your work? Which temperature range, either low or high, do you like? You can tell us in the comment section below.
